-
ADP
Adapter
-
AG
Distance between the fastening holes in mm
-
AH
Centre distance between pulleys in mm. According to your specification. Through DR and AH, we calculate the correct length of the belt
-
AHQ
Centre distance of the gear wheel in mm (large = 54.2 mm, medium = 46.25 mm, small = 27.2 mm)
-
ART-NR
Article number
-
AZ
Distance fastening hole to edge in mm
-
B
Width in mm
-
BB
Brush width in mm
-
BC
Brush code
-
BCP
Brush code (Drill pattern: O = open, D = dense, Z = very dense)
-
BD
Brush overall diameter in mm. Dependent on the visible hair length
-
BD-C
Brush diameter in inch, incl. the aluminium core
-
BD-ST
Standard brush diameter in mm
-
BG
Drill hole diameter in mm
-
BG-P
Suitable for bore, in mm
-
BM
Bottom (J = yes, N = no, ZS = no and length according to your specification)
-
BP
Fill density: O = open, D = dense, Z = very dense
-
BPR
Fill: 1 = axial, 2 = left pitch, 3 = right pitch, 4 = chevron
-
BPS
Fill: O = half filled, D = completely filled
-
C
Circumference in mm
-
D
Bore diameter in mm
-
D1
Diameter of the shaft in mm
-
D2
Diameter of the flange in mm
-
DR
Diameter pulley in mm. According to your specification
-
E
Endless, tail ends fastened together (J = yes, N = no). Dependent on the belt length
-
ED
External brush diameter in mm
-
ED-C
Core diameter exterior in mm
-
F-C
Holding cups of the brush cassette: OC = open holding cup, DC = closed holding cup.
-
FL
Flange (J = with flange / strip brushes are mounted in to side plates, N = no flange / strip brushes are mounted directly to the core)
-
FX
Fixing option: 0 = none, 1 = round hole, 2 = CSK-hole, 3 = slots, 4 = self-adhesive tape. Dimensions of numbers 1, 2 and 3 in consultation
-
GB-BP
Diameter of the brush plate in mm
-
GB-KM
Core material of the brush plate
-
GR
Hand grip (GS = straight, GC = curved)
-
H
Height in mm (thickness)
-
HL
Type of handle (A = standard, B = ergonomic, C = telescopic, D = ergo telescopic)
-
HLR
Holder multiple opties. N = no holder required. Other abbreviations see technical drawings
-
HR
Heat resistance
-
ID
Inner diameter of the brush in mm
-
ID-C
Core diameter interior in mm
-
KD
Core diameter in mm
-
KL
Colour code: 1 = white, 2 = blue, 3 = red, 4 = yellow, 5 = green, 6 = black, 7 = orange, 8 = purple, 9 = beige, 10 = brown, 11 = grey
-
KLH
Colour code: A = natural, B = silver anodised, C = bronze anodised, D = white, E = brown
-
KM
Core material
-
L
Length in mm
-
L1
Length of the brush in mm
-
L2
Length of the shaft in mm
-
L2L
Length of the left shaft in mm
-
L2R
Length of the right shaft in mm
-
L3
Length of the core in mm
-
LB
Belt length in mm. According to your specification
-
LC
Length of the centre distance between the gear wheels in mm. According to your specification. Through AHQ and LC, we calculate the correct length of the belt
-
LM
Length dependent on your machine type
-
M
Bore hole with Metric thread
-
M--Ww
Bore hole with Metric or Whitworth thread
-
NB
Needed number of fastening bolts
-
NBS
Number of bundles. Dependent on the length of the brush cassette
-
NK
Number of steel cables
-
NT
Number of tops
-
NTR
Number of tracks
-
NW
Number of wires per bundle
-
OB-BP
Diameter of the brush plate in mm. SMT = Segment, WL = Brush wheel
-
PCK
Packing size
-
PHB
PHB approved (J = yes, N = no)
-
RH
Number of rows
-
RPM
Revolutions per minute (max. RPM)
-
SCH
End of the brush with tassel (J = yes, N = no, U = twisted loop)
-
SF
Number of cutting faces
-
SG
Slots (J = yes, N = no)
-
SH
Shaft (J = with shaft, N = without shaft)
-
T
Depth in mm
-
TM
Machine type ("Other" = on the next page you can specify your machine type)
-
TMS
Serie
-
UHG
Type: A = soft, B = medium, C = hard, D = very hard
-
VD
Bristle diameter in mm
-
VHG
Hygiene brushes type of fill: S1 = soft / unflagged ends, S2 = soft / flagged ends, M1 = medium / unflagged ends, M2 = medium / flagged ends, H1 = hard / unflagged ends, H2 = hard / flagged ends
-
VM
Filling material
-
VT
Type of fill: Record (Special) = crimped (extra fixed), Ultra = twist knot, Multicord (Special) = cord construction (extra fixed), Delta = crimped wire bonded in plastic, Plus-Ultra = twist knot with high quality wire, TS-Special = brush with support ring, Alpha (Special) = abrasive fibers (extra fixed)
-
WD
Diameter of the wire in mm
-
WF
Waterfed (J = yes, N = no)
-
Ww
Bore hole with Whitworth thread
-
ZH
Visible hair length in mm
-
ZH-ST
Standard visible hair length in mm
-
ZK
Number of knots per row
-
ZR
Knot direction (R = right, L = left)