Because of its unique shape, brush belts create a very own range of applications. They are used for moving, slowing down, transporting, supporting and cleaning. Brush belts are available in three types.

The V-string belt

This brush is often used for cleaning of several kinds of surfaces. They are also fit to transport and guide sensitive and fragile products.
The V-string is made of a core made of polyethan or rubber with a canvas insert. The width and height are standard, for which fitting V-string poulies are delivered together with the brushes.
The V-string is suited for small measurements. Depending on the width, it is made with one or more brush rows. The brush is easy to assemble and disassemble. The length determines whether extra support is needed to position the belt well. An advantage of this brush is that for all types the standard V-string can be used. This belt can be delivered as well endless as on a roll.

The flat brush belt

This type of belt can be used for the same application as the previous type. The advantage is that it can be made in wider range of widths, from 25 to 400 mm.
The flat belt is often used for transporting and cleaning. You can obtain an optimal cleaning by putting the belt axial.
The flat brush belt is normally made of chrome leather in different thickness, or of plastic. In case of a large length or width, the belt is mostly made with strings at the bottom to get a good rotation. The extended possibilities in width allow fillings from open until extremely tight. This belt can be delivered as well endless as on a roll.

The toothed brush belt

Also this type of belt has the same applications. The major advantage is the timing. The belt runs over toothed poulies, which makes sure there is no slipping thus assuring a right timing. The running speed can be set up exactly and it can go until 6 m/s.
The toothed belt is a flat belt made of polyethan or another plastic with toothing at the bottom.
For the standard dimensions, there are standard poulies. Both  the dimensions and the poulies of this belt are standardised. The filling can only be put on the back of the tooth, which means that the filling always is relatively open.